Autoloader Screwdriver set

Best interchangeable bit screwdriver, worst packaging.

This set of screwdrivers with interchangeable bits is a great product. A few years ago my brother inlaw gave me one for Christmas. I use this on most jobs and have never lost a bit.
This past week I bought a set of two, one large and one small for my Mother’s kitchen tool box. Great idea since she has an assortment of broken screw drivers and some dried up tape in there, with a tack hammer.
package
Now comes the problem. The packaging is great if you never want to remove the screwdriver.
screwdriver

Autoloader Screwdriver set

This set of screwdrivers with interchangeable bits is a great product. A few years ago my brother inlaw gave me one for Christmas. I use this on most jobs and have never lost a bit.
This past week I bought a set of two, one large and one small for my Mother’s kitchen tool box. Great idea since she has an assortment of broken screw drivers and some dried up tape in there, with a tack hammer.
package
Now comes the problem. The packaging is great if you never want to remove the screwdriver.
screwdriver

Eyeglasses

There was a boy with eyeglasses and he hated them. His dad had him working one day on the house and he slipped those glasses down inside the wall and told his parents that he lost the glasses.
Years later he told his wife and she told his parents what happened to the glasses.
Merry Christmas Uncle Bob.

So then there was a lady with a rooster.

This rooster acted like a dog. He followed her around and watched whatever she would do. He loved the attention that she gave him.
She also had two hens. The rooster he would visit these hens. Until one day first one hen and then the other went missing.
The neighbor had a couple hens. So the rooster he went visiting. The neighbor lady called and said ” I shooed your rooster away from my hens, and chased him down the driveway”.
The rooster he lived eight years. He was a good companion. Then one cold day he slipped quietly into the darkness.
He never did return and the lady she was sad to see him go.

So then there was a lady with a rooster.

This rooster acted like a dog. He followed her around and watched whatever she would do. He loved the attention that she gave him.
She also had two hens. The rooster he would visit these hens. Until one day first one hen and then the other went missing.
The neighbor had a couple hens. So the rooster he went visiting. The neighbor lady called and said ” I shooed your rooster away from my hens, and chased him down the driveway”.
The rooster he lived eight years. He was a good companion. Then one cold day he slipped quietly into the darkness.
He never did return and the lady she was sad to see him go.

Cisco 831 Password reset

I am using a Belkin (F5U409) USB to serial adapter and the ctrl-break sequence doesn’t seem to make it to a Cisco 831 after I messed up AAA.
The following worked to get me into ROMMON and correct my errors.
If you still are facing issues then open the router’s box and take out the Flash SIMM… it will try to look for an IOS file thrice and then will fall into rommon automatically
You can use the following link for hardware installation:
http://www.cisco.com/en/US/customer/products/hw/routers/ps221/prod_configuration_guide09186a0080099429.html#wp1077820
After you are in rommon, issue the command “confreg 0x2100” and “reset” the router, you will again go into rommon.
Then power down and insert the Flash once again in the chassis and then bootup again, because of config-register 0x2100, the router will go to rommon and then you should check the new IOS that you are trying to install.

I booted the 831 back up and from “rommon> confreg 0x2142”.
Then “rommon2> reset”.
Power down, reinsert flash and power back up.
It loaded everything and booted to “router> en”.
Then “router# copy start run”.
Next “router# config t”.
“Router(config)#no aaa new-model”
“Router(config)#enable secret password”
Router(config)#config-register 0x2102
Router(config)#end
Router#wr mem
Router# reload

Cisco 831 Password reset

I am using a Belkin (F5U409) USB to serial adapter and the ctrl-break sequence doesn’t seem to make it to a Cisco 831 after I messed up AAA.
The following worked to get me into ROMMON and correct my errors.
If you still are facing issues then open the router’s box and take out the Flash SIMM… it will try to look for an IOS file thrice and then will fall into rommon automatically
You can use the following link for hardware installation:
http://www.cisco.com/en/US/customer/products/hw/routers/ps221/prod_configuration_guide09186a0080099429.html#wp1077820
After you are in rommon, issue the command “confreg 0x2100” and “reset” the router, you will again go into rommon.
Then power down and insert the Flash once again in the chassis and then bootup again, because of config-register 0x2100, the router will go to rommon and then you should check the new IOS that you are trying to install.

I booted the 831 back up and from “rommon> confreg 0x2142”.
Then “rommon2> reset”.
Power down, reinsert flash and power back up.
It loaded everything and booted to “router> en”.
Then “router# copy start run”.
Next “router# config t”.
“Router(config)#no aaa new-model”
“Router(config)#enable secret password”
Router(config)#config-register 0x2102
Router(config)#end
Router#wr mem
Router# reload