Note to self for 2009 Suzuki Sx4

I put a new battery in the fob for my 2009 Suzuki Sx4 and followed the steps below to reprogram the fob.

1)Confirm that all doors are closed and ignition key is out of ignition key cylinder.
2)Open driver side door.
3)Insert ignition key into ignition key cylinder within 10 seconds after step 2).
4)Remove ignition key from ignition key cylinder within 10 seconds after step 3).
5)Push and release driver side door switch 3 times by hand within 20 seconds after step 4).
6)Insert ignition key into ignition key cylinder within 10 seconds after step 5).
7)Remove ignition key from ignition key cylinder within 10 seconds after step 6).
8)Press and hold “LOCK” and “UNLOCK” buttons on transmitter for 5 seconds or more within 20 seconds after step 6) and confirm that all doors are operated from lock to unlock.
9)Press “LOCK” or “UNLOCK” button on the transmitter within 5 seconds after step 8) and confirm that all doors are operated from lock to unlock. With this process, transmitter code has been programmed.
10)If you want to program the additional transmitter, repeat the procedure from Step 1) through Step 9).
11)Make sure that keyless entry system properly operates by operating programmed transmitter(s).

I had both sets of keys with me when I did this. I just tossed the second set on the ground about ten feet away from the car while I did this and then tested both fobs after I was done.